In various types of vehicles and industrial equipment, the brake system is as important as a safety guard. Proper maintenance of the brake system can effectively ensure safe operation and extend the service life of the equipment.
For the brake system of common vehicles such as cars, regular inspection of the brake fluid is the key first step. Brake fluid is hygroscopic and its performance may deteriorate over time, so it should be inspected and replaced at the time intervals specified in the vehicle manual. Generally speaking, you need to pay attention to the condition of the brake fluid every 2-3 years or after a certain mileage (such as 40,000-60,000 kilometers).
Brake pads are also vulnerable parts in the brake system. In daily driving, pay attention to the signals of brake pad wear, such as abnormal sounds when braking or longer braking distance. Under normal circumstances, the replacement cycle of brake pads is 30,000-50,000 kilometers, but this also depends on factors such as driving habits and road conditions.
Brake discs should not be ignored either. After long-term use, brake discs may be worn and deformed. Check the flatness of the brake disc surface. If it is found that the unevenness exceeds the specified range, it should be repaired or replaced in time.
In large industrial equipment, in addition to similar component inspections, it is also necessary to pay attention to the sealing of the air circuit or hydraulic system of the entire brake system. During regular equipment maintenance, it is necessary to carefully check for possible leaks to ensure that the brake pressure is stable and reliable.
In addition, no matter what kind of equipment, it is extremely important to keep the brake system clean. Dust, impurities, etc. may affect the normal operation of the brake components, so the brake system should be kept away from dirty environments and protective measures should be taken when not in use. Only by comprehensively and carefully maintaining the brake system can it be ensured to be in the best working condition at all times.
